home :: saildrive strippers :: Propeller compatibility matrix
Your shopping cart is empty

With the increasing numbers of propellers available on the market and the continued growth of new boats being installed with saildrive legs, knowing what combinations are compatible is becoming an ever more complex task.

To install the saildrive Stripper, there is always a requirement to modified the propeller. These basic modifications are covered in our installation instructions and are in addition to any further modifications list here.

Below is a compatibility matrix for each of the saildrive models of Strippers available and the common propeller models. These lists are by no ways exhaustive or set in stone, as more propellers come onto the market and developments in the Stripper are made, these lists will change.

See bottom of page for list of untested propellers.

The following table is the Volvo 120 Stripper Compatibility Matrix

Propeller Compatibility
Fixed Yes
Volvo folding
Radice
Yes, but requires an adaptor kit
Kiwi Prop Yes
Flex-o-fold Yes
Autoprop No
Varifold No
Variprofile No
Maxprop Class Yes, but requires modification by the manufacturer / distributor
Maxprop Cushion drive Yes, but requires modification by the manufacturer / distributor and an adaptor plate with modified Stripper
Gori 2 Blade Yes
Gori 3 Blade No


The following table is the Volvo 130,140 and 150 Compatibility Matrix

Propeller Compatibility
Fixed Yes
Volvo folding
Radice
Yes, but requires an adaptor kit
Kiwi Prop Yes
Flex-o-fold Yes
Autoprop No
Varifold No
Variprofile No
Maxprop Class Yes, but requires modification by the manufacturer / distributor
Maxprop Cushion drive Yes, but requires modification by the manufacturer / distributor and an adaptor plate with modified Stripper
Gori 2 Blade Yes
Gori 3 Blade No


The following table is the Yanmar SD20 and SD30 Compatibility Matrix
All Yanmar Strippers require a modified propeller nut, or adaptor kit, which are included with the Stripper by default.

Propeller Compatibility
Fixed Yes, but requires an adaptor kit
Volvo folding
Radice
Yes, but requires an adaptor kit
Kiwi Prop Yes, but requires an adaptor kit
Flex-o-fold Yes, but requires an adaptor kit
Autoprop No
Varifold No
Variprofile No
Maxprop Class Yes, but requires modification by the manufacturer / distributor and an adaptor kit
Maxprop Cushion drive Yes, but requires modification by the manufacturer / distributor and an adaptor plate with modified Stripper
Gori 2 Blade Yes, but requires an adaptor kit
Gori 3 Blade No


The following table is the Yanmar SD40,SD50 and SD60 Compatibility Matrix
All Yanmar Strippers require a modified propeller nut, or adaptor kit, which are included with the Stripper by default.

Propeller Compatibility
Fixed Yes, but requires an adaptor kit
Volvo folding
Radice
Yes, but requires an adaptor kit
Kiwi Prop Yes, but requires an adaptor kit
Flex-o-fold Yes, but requires an adaptor kit
Autoprop No
Varifold No
Variprofile No
Maxprop Class Yes, but requires modification by the manufacturer / distributor and an adaptor kit
Maxprop Cushion drive Yes, but requires modification by the manufacturer / distributor and an adaptor plate with modified Stripper
Gori 2 Blade Yes, but requires an adaptor kit
Gori 3 Blade No

We try to confirm every saildrive propeller available on the market for its compatibility with the Stripper, however the following have yet to be tested

The information on this page was last updated December 2010